Hey Everyone! Here is the October bundle printed with FDM. The Gatehouse was a hefty project but I feel the sub assembly work quite good for it, the parts are manageable. The gate works just as intended, I hope you like it.
Happy Print...
2023-10-24 15:42:36 +0000 UTC View Post
Hey Everyone!
As you may know October marks the 2 year anniversary of my journey as a miniature designer. This year compared to the last one was a bit slower but it was still amazing. I think I grew a lot as a miniature designer, and perfect...
2023-10-19 15:15:30 +0000 UTC View Post
Hey Everyone! I finally finished the wall upgrades for the Fortified Bastion kit. I made two versions, one is an insert that you can attach to the older bastion files, this way you will be able to use the bastion as a single structure or part of a...
2023-10-13 11:25:40 +0000 UTC View Post
Hey Everyone! The October files are here. Finally a worthy Gatehouse for all the walls and towers. The gates are operable, you can close or open them by sliding the wings into the structure. Also I focused on wall variation this month and made a l...
2023-10-11 15:53:14 +0000 UTC View Post
Hey Everyone! I heard you like Jurassic Park gates. So I pretty much made one. Getting back to work was a little slower than I expected so this is the only new file I can show you so far. I added the fire platforms too that I showed you last month...
2023-09-29 04:58:38 +0000 UTC View Post
Hey, Everyone! It's been a while again since I did a gift swap with another creator. I'm happy to announce the awesome DakkaDakka.Store sent a mighty warrior our way. I already added it to the MMF release. Please welcome a few words from them:
... 2023-09-28 16:28:47 +0000 UTC View Post
Hey Everyone! Here is the September bundle printed in FDM. I'm planning to paint this Fortress setup for a friend. Hopefully sooner than later you will be able to see it realized.
Happy Printing!
2023-09-25 15:42:52 +0000 UTC View Post
Hey Everyone! The September files are here. This Fortress World theme is at full speed now. With a new Missile Turret I think I'm done with turrets for a while now, probably covered everything. Finally I figured out the direction with the walls so...
2023-09-09 08:36:17 +0000 UTC View Post
Hey Everyone! I hope you had a wonderful summer. I will take a three week vacation to have some rest and be with my family. I will be back around September 18th. No worries I will release the new files on the 8th of September as promised so you ca...
2023-08-27 10:16:54 +0000 UTC View Post
Hey Everyone!
Here is a little sneak peek for September. I finally decided on the wall types for the fortifications so I spent most of my time designing those. I made some variations like a gun nest with different weapon options, a door, sta...
2023-08-26 11:24:03 +0000 UTC View Post
Hey Everyone! Here is the August bundle printed in FDM. The base of the Shield Generator took me like 30 hours to print. I don't usually like to make parts this big but it slipped through my sensors somehow. I hope it won't be a problem for you. 2023-08-21 12:38:20 +0000 UTC View Post
Hey Everyone! The Summer Sale is live on MyMiniFactory for everybody. Use the code
SUMMER23 at checkout and you will receive a 50% discount. Live until September 7th.
2023-08-16 14:34:36 +0000 UTC View Post
Hey Everyone! The August files are here. I'm continuing the Fortress World theme with another set of turrets and a shield generator. The Shield Generator comes with a few different options. You can choose a two or a four shield vane top. The botto...
2023-08-10 14:51:10 +0000 UTC View Post
Hey Everyone!
August is almost around the corner, it's time to show you what I was working on this month. Last month everything was about steel and concrete, fortifications, solid rounds and shells. I thought this month would be interesting ...
2023-07-28 16:59:47 +0000 UTC View Post
Hey Everyone!
It's been a while since I did a gift swap with another creator. I'm happy to announce the awesome Print Minis sent a mighty warrior our way. I already added it to the MMF release. Please welcome a few words from them:
... 2023-07-27 09:45:06 +0000 UTC View Post
Hey Everyone! Here is the July printed in FDM. I was really interested in how the FDM would take these more detailed turrets but it worked out quite well. I had a few minor issues with overhangs and angled surfaces but I learned from them. I also ...
2023-07-24 15:31:43 +0000 UTC View Post
Hey Everyone! I'm happy to announce the supported files are up on MMF. Happy resin printing!
2023-07-21 15:30:46 +0000 UTC View Post
Hey Everyone!
Please welcome the Fortified Position Alpha, the kick off project of my new Fortress World
theme. I made a Fortified Bastion with different sides you can insert into it. I also future proofed the bastion so when I decide ...
2023-07-10 17:19:11 +0000 UTC View Post
Hey Everyone! July is fast approaching and that means some new files. I dipped my toes in the Fortress World theme and damn I liked it a lot. I made a bastion / fortified riser and some towers that match with it. Also a lot of gun options for the ...
2023-06-28 17:14:22 +0000 UTC View Post
Hey Everyone! Here is the June bundle printed in resin and FDM. The two towers are so large it was really tricky to take some pictures but in the end I prevailed. Now I can't wait to set them up on a gaming table and see how it works. I think the ...
2023-06-20 17:14:15 +0000 UTC View Post
Hey Everyone! I've made the Air Scrubber a free STL for everyone to grab. The Air Scrubber comes in two versions. One is a standalone terrain piece the other is able to connect to my Industrial Pipe terrain. You can print it both on the FDM or any...
2023-06-13 08:35:17 +0000 UTC View Post
The Towers of the Wasteland bundle is here. It's actually two towers and two smaller objects but I just couldn't come up with a better name for it :D In this release you will find:
Comm Tower
Wind Turbine
Radar
Armored Mobi...
2023-06-09 10:18:19 +0000 UTC View Post
The June files are almost here. I went with a little different direction, it's not exactly mining themed but I think the new terrain will complement anything from my palette pretty well. I wanted to implement towers on my table and came up with a ...
2023-05-30 16:36:15 +0000 UTC View Post
Hey Everyone! Here is the May bundle printed in resin and FDM. I feel this month will be a really good start for my upcoming Frontier building bundles. With hollowing the large office building it took actually less time to print than the Refueling...
2023-05-09 09:37:03 +0000 UTC View Post
Finally once Im a bit early and not late :D Please welcome Mining Site Gamma, the next installment of my mining themed terrain. With all the Tonka truck talk I just had to make a huge Dump Truck and I think I really nailed this one. I just can't w...
2023-05-05 15:50:23 +0000 UTC View Post
Just a few days and April ends. With May comes a new bundle of models. I'm going down the mining theme still as I enjoy it thoroughly. All the Tonka toy talk inspired me so I had to do a classic dump truck design. It will be quite large. I'm also ...
2023-04-28 16:42:02 +0000 UTC View Post
Hey Everyone! Here is the April bundle printed in resin and FDM. So how do you feel about long prints? The Refuelling Station was quite a long one 22 hours on my setup. I personally prefer shorter prints less chance of it failing at the end and wa...
2023-04-17 15:29:13 +0000 UTC View Post
Hey Everyone!
The April files are here, please welcome the Mining Site Beta. For this month I designed a smaller Excavator for the folks who don't quite decided if they want the commitment for the super heavy :D Also a Crane Crawler that is ...
2023-04-06 12:29:13 +0000 UTC View Post
Hey Everyone! End of the month is upon us and with it arrives a new sneak peak. For the next month I continue the mining and digging theme with an Excavator and a Crane Crawler. I just had to make a normal size excavator too, its tiny compared to ...
2023-03-30 17:22:44 +0000 UTC View Post
Hey Everyone! Here is the March bundle printed in resin and FDM. It was a bliss to print a little with FDM so expect a lot more terrain coming.
Happy printing!
2023-03-23 16:52:00 +0000 UTC View Post